Door and window processing center

Product Description

Size	4400(L)1610(W)1740(H)
Material size	2500(L)300(W)50(H)
Processing tenon length	<50mm
Processing shape width	<35mm
weight	2500Kg
Voltage/Frequency/Power	380v / 50Hz / 16.5Kw
Suction port	Φ100*4
Movement speed	30m/min
Movement speed	10m/min
repeatability of positioning	±0.1
Air pressure	0.5~0.8Mpa，φ10
Spindle parameters	Max：12000 rpm/φ30，<φ90
Spindle parameters	Max：6000 rpm/φ20，<φ200
Spindle parameters	Max：12000rpm/ER25(4-16mm)
lubricating oi	Hv32

Precautions for the use of equipment
1. The operator must be familiar with the performance, operation and maintenance methods of the equipment. Strictly abide by the safe operation regulations of CNC equipment. Do not operate the machine without professional training.
2. The operator of the machine must wear protective equipment before using the machine to ensure safety. No gloves, scarves, etc. are allowed to operate.
3. The machine is not allowed to maintain, refuel, clean and adjust during operation.
4. Before working every day, check whether the lubrication system of the machine is in good condition. Do lubrication and maintenance work for the machine on time, usually once every two days.
5. Keep the environment around the equipment tidy and clean the machine frequently.
6. Operate strictly in accordance with the boot sequence in the machine manual.
7. Before the machine starts to work, it should be warmed up, and carefully check whether the lubrication system is working properly. If it has not been started for a long time, you can use manual lubrication to provide lubrication to each part; check whether the voltage, air pressure, and oil pressure meet the working requirements.
8. It is forbidden to lift the rotating spindle, workpiece or other moving parts by hand or by any other means.
9. During the operation of the equipment, the operator shall not leave the post, and the machine tool shall immediately stop working if an abnormality is found, and shall be inspected and repaired.
10. When the machine is working, non-operators should not stand on both sides to watch, so as to avoid accidents.
11. During the operation of the machine tool, do not remove chips, and avoid touching the moving parts of the machine with your hands; when removing chips, you must use certain tools to avoid being scratched by the chips;
12. Generally, two persons are not allowed to operate the machine at the same time. But when a certain task requires two or more people to complete it together, they should pay attention to coordinate their actions with each other.
13. The operator must stop the machine when changing tools, workpieces, adjusting workpieces or leaving the machine tool while working.
14. If you find that the lathe is running abnormally or malfunctions during processing, you must stop it for inspection immediately to avoid danger.

Company Profile

Drive the innovation of smart tenon joints and build a model of the smart industry together.

Suzhou shikainiu CNC Equipment Co., Ltd. is a high-tech enterprise in Jiangsu Province. The company inherits the traditional Chinese furniture manufacturing technology and reproduces various tenon and mortise processes through modern equipment. The main products are optimizing sawing, tenon and mortise production, door and window production.

Equipment Safety Operation Details

Before leaving the factory, the parts installed on the tenon and mortise equipment should not be disassembled at will without the knowledge or permission of the woodworking equipment dealer.
The operator must be familiar with the performance, operation, and maintenance methods of the tenon-and-mortise equipment. Strictly abide by the safety operation rules of CNC equipment. Do not operate the machine without professional training.
Ensure that there are no obstacles around the equipment before running, and operate in strict accordance with the boot sequence in the machine manual.
Maintenance, refueling, cleaning and adjustment during operation are not allowed when the machine is in operation.
During the operation of the equipment, the operator is not allowed to leave the post, and the machine tool will stop working immediately if it finds any abnormal phenomenon, and carry out maintenance.
The air source of the equipment should be kept dry, and the air gun should be free of water when cleaning the equipment.
The machine operator must wear protective equipment to ensure safety before using the machine. Gloves, scarves, etc. are not allowed to operate.
Do not stand around and watch at both ends of the equipment, and do not lean over and watch the action of the cutter head during processing.
During processing, you must pay attention to the position of the presser foot and the position of the discharge to prevent personal injury when pressing the material.
When mortise and tenon is machined, the dust cover must be put down to prevent personal injury caused by the accidental entry of the body parts.
When unloading, do not put your hands near the presser foot presser.
It is forbidden to release the rotating spindle, workpiece, or other moving parts by hand or in any other way.
During the operation of the machine tool, do not remove chips, and avoid touching the moving parts of the machine tool with your hands; when removing chips, use certain tools to avoid chips from cutting your fingers.
Generally, two people are not allowed to operate the machine at the same time. However, when a job requires two or more people to complete it together, attention should be paid to coordinating the actions with each other.
The operator must stop and turn off the inverter power when changing tools, workpieces, adjusting workpieces, or leaving the machine tool.
If it is found that the lathe operates abnormally or malfunctions during the tenon-and-mortise machining process, stop the machine immediately to check to avoid danger.

Equipment Care Instructions

Always keep the work surface free of sawdust to affect the accuracy of the material.
Keep the environment around the equipment tidy and clean the machine frequently.
Clean the dust trough of the equipment after every two hours of operation.
Clean the whole machine once every working day.
Confirm the oiling of tenon and tenon mechanical equipment every day, and the screw, guide rail, slider, etc. must be guaranteed to have lubricating oil.
Clean the interior of the fuselage once a week with wood ash.

Door and window processing center

Product Description

Company Profile

Equipment Safety Operation Details

Equipment Care Instructions

Enquiry